Most of the time, when you first power on a computer, the BIOS (Basic Input Output System) will automatically detect and enable all of the computer’s RAM (Random Access Memory) slots. However, there are times when you may need to manually enable or disable a RAM slot in the BIOS.
For example, if you’re upgrading your computer’s RAM, you may need to enable a new RAM slot so that the new RAM can be used. Or, if you’re troubleshooting a computer issue, you may need to disable a RAM slot to see if that is causing the problem.
Exclusive Slots & Free Spins Offers:
In this article, we’ll show you how to enable or disable a RAM slot in the BIOS on a Windows 10 PC.
Before we get started, it’s important to note that you should only enable or disable a RAM slot in the BIOS if you’re having issues with your computer. If you don’t know what you’re doing, it’s easy to accidentally change settings in the BIOS that can cause serious problems.
So, if you’re not comfortable making changes in the BIOS, it’s best to leave things as they are.
With that said, let’s get started!
Step 1: Enter the BIOS
The first thing you need to do is enter the BIOS. To do that, restart your computer and press the key that appears on your screen during bootup.
This key is usually F2, F10, F12, or ESC. If you’re not sure which key to press, look for a message on your screen that says something like “Press F2 to enter setup.”.
Once you’re in the BIOS, use the arrow keys on your keyboard to navigate to the “Boot” tab. Then, use the arrow keys to scroll down to the “Boot Priority Order” section.
In this section, you should see all of your computer’s storage devices listed in order of priority. The first storage device listed is typically set as the primary boot device.
Step 2: Enable or Disable a RAM Slot
To enable or disable a particular RAM slot, find the slot in question and press Enter. This will open up a submenu for that particular slot. In this submenu, use the arrow keys to select either “Enabled” or “Disabled”, then press Enter.
If you’re enabling a new RAM slot for an upgrade, be sure to select “Enabled”. Otherwise, select “Disabled”.
If you’re disabling a RAM slot because you think it might be causing problems with your computer, it’s best to try disabling only one slot at a time so that you can easily identify which slot is causing issues. Once you’ve disabled a particular slot and restarted your computer without any problems, feel free to try enabling other slots one at a time until all slots are enabled again.
Step 3: Save Your Changes & Exit The BIOS
After making your changes in the BIOS, be sure to save them before exiting. To do that, press F10 on your keyboard and then press Enter when prompted by the message that appears on your screen asking if you want to save changes and exit BIOS setup.
Your computer will then reboot and boot up normally with your changes in place. And that’s all there is to it!.
