How Do You File Down Nut Slots?

When it comes to working on your guitar, one of the most basic things you can do is file down the nut slots. This is a relatively simple process, but there are a few things you need to know before you get started.

The first thing you need to know is what type of nut you have. There are two basic types of nuts: string-thru and stop.

 Exclusive Slots & Free Spins Offers: 

String-thru nuts have slots that go all the way through the nut, while stop nuts have slots that only go part of the way through.

Once you know what type of nut you have, you need to determine what size file you need. The most common sizes are 0.010”, 0.020”, and 0.

030”. If you’re not sure which size to get, it’s always better to err on the side of a smaller file; you can always file more if needed, but you can’t put material back once it’s been removed.

Once you have your file, there are a few different ways to go about filing the slots. The most important thing is to take your time and go slowly; it’s easy to accidentally remove too much material, which can throw off your whole guitar’s intonation.

One method is to start at one end of the slot and work your way towards the other end in a single pass. Another method is to make multiple passes, starting in the middle of the slot and working your way outwards towards each end.

Once you’ve finished filing the slots, it’s important to check the fit of your strings. Make sure they seats properly in the slots and that they’re not too loose or too tight. If everything looks good, congratulations! You’ve just successfully filed down your nut slots!.