How Do You Make Wine Glass Slots?

Wine glass slots are the indentations or pockets on the side of a wine glass that are used to keep the wine glass stem in place. There are many different ways to make wine glass slots, but the most common method is to use a round file or a Dremel tool.

First, you will need to find the center of the wine glass slot. To do this, you will need to measure the width of the wine glass slot and divide it in half.

Once you have found the center, you will need to mark it with a pencil or pen.

Next, you will need to take your round file or Dremel tool and start at the center of the wine glass slot. You will then need to file or grind away at the glass until you have created a pocket that is big enough for the wine glass stem.

Be careful not to file too deeply, as you don’t want to create a hole in the side of the wine glass.

Once you have created the pocket, you will need to test-fit the wine glass stem. If it is too loose, you can try filing or grinding away at different areas until you find a snug fit.

If it is too tight, you may need to use a different size stem or start over from scratch.

Finally, once you have found a good fit, you will need to clean up any rough edges with a diamond file or sandpaper. Then, insert the wine glass stem into the pocket and enjoy your new wine glass!.