How Do You Add Infusion Slots to a Ring?

There are a few things you need to know in order to add infusion slots to a ring. The first is that you need a steady hand and a sharp knife.

The second is that you need to be very careful not to cut yourself.

The third thing you need to know is that there are two ways to add infusion slots to a ring. The first way is to use a needle and thread.

This method is the most difficult and time-consuming, but it is also the most reliable.

The second way to add infusion slots to a ring is to use a hot glue gun. This method is much easier and faster, but it is not as reliable.

Once you have decided which method you want to use, the next step is to find the right size needle and thread or hot glue gun for your ring. If you are using a needle and thread, you will need to make sure that the needle is small enough so that it will not damage the ring.

If you are using a hot glue gun, you will need to make sure that the glue sticks are strong enough to hold the ring together.

After you have gathered all of your materials, the next step is to start adding infusion slots to your ring. If you are using a needle and thread, start by threading the needle through the back of the ring.

Then, insert the needle into the center of one of the gems on the top of the ring. Slowly turn the needle until you have made a complete circle around the gem.

Once you have made one complete circle, pull the needle through the back of the ring again and repeat this process on another gem. Continue until all of the gems on the top of the ring have been threaded.

If you are using a hot glue gun, start by applying a small amount of glue to one of the gems on the top of the ring. Then, quickly place another gem on top of it and hold it in place for a few seconds while the glue dries.

Repeat this process until all of the gems on the top of the ring have been glued down.

Once all of the gems on top of the ring have been added, turn it over and repeat this process on the bottom side of the ring. When you are finished, your ring should have two rows of gems with empty space in between them.

This empty space is where you will add your infusion slot.

To add an infusion slot, simply take your knife and carefully make a slit in between two gems on either side of where you want your slot to be located. Then, insert your chosen material into this slit and carefully push it down until it is flush with the surface of the ring.

Once your material is in place, use your knife to carefully trim away any excess so that it fits snugly into its new home.